Arduino Mega cannot recieve any sketches, stk500_recv() programmer is not responding
Clash Royale CLAN TAG #URR8PPP Arduino Mega cannot recieve any sketches, stk500_recv() programmer is not responding Yesterday we were trying to update the firmware of our 3D-printer a Tevo Tarantula i3 The printer was running Marlin 3D Printer Firmware. We installed a new module a TL-Touch Sensor, a chinese copy of the Bl-Touch an auto bedleveling touch sensor for a 3D printer. After re-configurating a new version of the firmware for our setup in the Arduino IDE we went on with uploading the sketch to the Arduino Mega that was controling our 3D printer. Before we started uploading we made sure the right COM-port was selected in the Arduino IDE and that also the right type of Arduino was selected. The Arduino Mega 2260. Then we started with compiling the firmware and then uploading it to the Mega, Somewhere in between that moment the IDE freezed and crashed. As a response we removed the USB cable that was connected from the PC uploading the firmware onto the Arduino Mega, (This was a st...